CRUSHING AND TRANSFER PLANTS AND UNITS
 
Crushing plants are designed to break the rock mass with an average hardness within the set of equipment used for opencast mining in the coalfields and other deposits.

To provide continuous service of the plants, the material has to be charged into the receiving beins with the variable capacity charging facilities being provided.

Self-propelled crushing and transfer plants of the Type DPU are intended to receive, crush and discharge the rock mass of an average hardness during opencast operations.

Receiving bins of the DPU plants allow to perform charging with the use of a loader or an excavator.
 
SPECIFICATIONS
  Parameters Parameter values per Models
DPU-1000 DPU-2000
  Crushed material ultimate strength in uniaxial compression, kg/cm2(MPa) up to 150 (1500)
  Max output upon working material with max allowable strength in uniaxial compression, m3/hr 1600 2000
  Crusher:  
  Type DSHZ-1000/320 DSHZ-1300/300-DR
  Drive power, kW 2 × 315
  Conveyor feeder:  
  Type belt
  Belt width, mm 2400
  Belt speed, m/s up to 0.2
  Installation mode horizontally